Search
START TYPING AND PRESS ENTER TO SEARCH
My cart

No products in the cart.

CNX 1000 – CERAMIC PROTECT COATING

€36,38

*Price without VAT

Category:
CHARACTERISTICS

is a protective film for all surfaces that provides protection to gel coats,
paint, glass, plastic, aluminium, stainless steel in a simple and effective way.

The specially designed formula has been engineered to incorporate superior
water-repellent and anti-micro scratch properties that form a 2nd
protective layer and ensure a brilliant gloss effect. If the surface is properly
maintained, the protection can last for between 6 and 12 months.
ADVANTAGES

• Excellent protection against water, moisture, dirt,UV rays, abrasions and
micro-scratches.
• Excellent protection against sea salt.
• Powerful and effective water-repellent effect that lasts for several months.
• Very easy to use.
• “Easy to clean again” technology: dirt and other contaminants are deposited
on the treated surface, ensuring effortless cleaning in the future.
• Provides a superb gloss finish to the bodywork.
• Provides long-lasting protection against dirt, unwanted marks and
micro-scratches for several months.
• Can be applied onto all washable surfaces.
TECHNICAL SPECIFICATIONS

• Physical state: liquid
• colour: Colourless
• pH: ca. 5,5
• density: ca. 1
• Storage: keep tightly closed and protected from cold,
frost, UV rays and heat in a ventilated place.
• Environment: The surfactants contained in this
preparation comply with the criteria of biodegradability
as defined in Regulation (EC) no 648/2004 on
detergents.
• Legislation & safety: Please read the recommendations
on the safety data sheet and the original packaging. Do
not mix with other products. Safety data sheet available
on request.
INSTRUCTIONS OF USE

Respect usual safety measures for the use
of chemical products and wear the appropriate
individual protection equipment.
Always thoroughly prepare the surfaces to be
treated by washing with CNX20 CERANIUM™
SHAMPOO CERAMIC COATING.
Wash the surface completely with
CNX20 CERANIUM™ SHAMPOO
CERAMIC COATING,
rinse well and dry.
Spray CERANIUM™ CERAMIC PROTECT COATING onto a small surface area then proceed to spread
over the surface to be treated using a microfibre cloth. Finish the treatment with a dry microfibre cloth
or an orbital polisher equipped with a microfibre cloth taking care not to apply too much pressure
– this will ensure a lasting shine to the surface. The protective coating will harden after application.
Continue to apply to small areas until the treatment is complete. For example, when applying a
treatment to a car bonnet, it is necessary to apply the treatment to half of the bonnet and then
proceed with the 2nd half. The product should not be allowed to dry on the surface without wiping as
this will make the product harder to wipe off the surface being treated. The result is extraordinary:
dirt-repellent and micro-scratch protection and super gloss shine for your car.
Option to strengthen the protection by adding 1 or 2 subsequent applications to the surface. You must
allow 24 hours between each application. For routine maintenance of the surface coating provided
by CERANIUM™ CERAMIC PROTECT COATING, we recommend applying CNX50 CERANIUM™
MAINTENANCE COATING.
For more detailed information please consult our technical support.

Reviews

There are no reviews yet.

Be the first to review “CNX 1000 – CERAMIC PROTECT COATING”

Your email address will not be published. Required fields are marked *

Related products

Scroll Up
Hotline